Diagnosis Description: Configuration
Configuration has three functions as follows.
|
Function |
Description |
|
|
Read/Write Configuration |
Before Replace ECU |
Allows the reading of vehicle specification written in AV control unit to store the specification in CONSULT. |
|
After Replace ECU |
Allows the writing of the vehicle information stored in CONSULT into the AV control unit. |
|
|
Manual Configuration |
Allows the writing of the vehicle specification into the AV control unit by hand. |
|
CAUTION:
- When replacing AV control unit, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
- Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
- If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.