Confirmation/Adjustment Mode
- Start the diagnosis function and select "Confirmation/Adjustment". The confirmation/adjustment mode indicates where each item can be checked or adjusted.
- Select each switch on the "Confirmation/Adjustment Mode" screen to display the relevant trouble diagnosis screen. Touch the "Back" to return to the initial Confirmation/Adjustment Mode screen.
Display Diagnosis
Confirmation of the AV control unit screen and integral switch screen.
|
Item |
Description |
|
|
Color Spectrum Bar |
Display 8 colors of following bars.
|
|
|
Gradation Bar |
Display 64 gradation gray-scale image to a screen. |
|
|
Touch Panel |
Touch Panel Response Check |
Check the response of the touch panel. |
|
White Display |
Display white screen. |
|
|
Screenshot to USB |
Displayed, but not used. |
|
|
-curve |
Displayed, but not used. |
|
Vehicle Signals
A comparison check can be made of each actual vehicle signal and the signals recognized by the system.
|
Diagnosis item |
Unit |
Description |
|
Vehicle Speed |
[km] |
Vehicle speed is displayed. |
|
Ignition |
[ON/OFF] |
Ignition signal input status is displayed. |
|
Illumination Control |
[%] |
Illumination control signal input value is displayed. |
|
MR out |
[ON/OFF] |
Dimmer signal input status is displayed. |
|
Illumination Switch |
[ON/OFF] |
Light switch status is displayed. |
|
Reverse |
[ON/OFF] |
Reverse signal input status is displayed. |
|
Parking Brake |
[ON/OFF] |
Parking brake signal input status is displayed. |
|
ACC |
[ON/OFF] |
ACC power supply input status is displayed. |
Navigation
|
Item |
Description |
|
Sensor Information |
The reception status of GPS can be confirmed. |
Error History
The self-diagnosis results are judged depending on whether any error occurs from when "Self-diagnosis" is selected until the self-diagnosis results are displayed.
However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned ON and then no error has occurred until the self-diagnosis start. Check the "Error Record" to detect any error that may have occurred before the self-diagnosis start because of this situation.
The error record displays the time and place of the most recent occurrence of that error. However, take note of the following points.
- Place of the error occurrence is represented by the longitude and latitude at the time an error occurred. If current location mark has deviated from the correct position, then the place of the error occurrence cannot be located correctly.
- The frequency of occurrence is displayed in a up-and-down manner.
Count up method
- The counter resets to 0 if an error occurs when ignition switch is turned ON. The counter increases by 1 if the condition is normal at a next ignition ON cycle.
- The counter upper limit is 39. Any counts exceeding 39 are ignored." The counter can be reset (no error record display) with the "Delete log" switch or CONSULT.
|
Display type of occurrence frequency |
Error history display item |
|
Count up method |
CAN communication line, control unit (CAN), AV communication line, control unit (AV) |
Error item
If an error is displayed, perform Self Diagnosis using CONSULT.
Some error items may be displayed simultaneously according to the cause. If some error items are displayed simultaneously, the detection of the cause can be performed by the combination of display items
AV COMM Diagnosis
AV COMM Monitor
- Displays the communication status between AV control unit (master unit) and each unit.
- The error counter displays "OK" if any malfunction was not detected in the past and displays "0" if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39.
- The error counter is erased if "Reset" is pressed.
Items
Status
(Current)
Counter
(Past)
BUS OFF
OK / UNKW
OK / 0 - 39 / --
Mute
OK / UNKW
OK / 0 - 39 / --
RadNav
OK / UNKW
OK / 0 - 39 / --
CSW
OK / UNKW
OK / 0 - 39 / --
Amplifier
OK / UNKW
OK / 0 - 39 / --
CLUS
OK / UNKW
OK / 0 - 39 / --
TCU
OK / UNKW
OK / 0 - 39 / --
Camera
|
Item |
Description |
|
Correct Draw Line of Rearview Camera |
The guiding lines in the rear view monitor can be adjusted. |
|
Alter/Confirm Configuration |
Displays the current configuration data. |
|
Reset Configuration |
Initializes the camera system configuration. |
|
Adjust Guide Line of Rear View Cam |
The guiding lines in the rear view monitor can be adjusted. |
Delete Unit Connection Log
Deletes any unit connection records and error records from the AV control unit memory. (Clear the records of the unit that has been removed.)
Initialize Settings
|
Item |
Description |
|
Reset User Data |
Initializes the AV control unit memory. |
Version Information
Version information of the each control unit is displayed.
Software Update
Software of the AV control unit can be update.
|
Item |
|
Start Software Update |
|
Software Update History |
### Speaker Test
Select "Speaker Test" to display the speaker diagnosis screen. Touch "Start" to generate a test tone in a speaker. Touch "Next" to generate a test tone in the next speaker. Touch "End" to stop the test tones.
Radio Tuner
Displays FM and AM monitor information.
|
Item |
Service diagnosis |
|
FM Monitor |
PS Name/Frequency |
|
Multipath/Quality |
|
|
Neighbor Channel |
|
|
RDS: |
|
|
Antenna Status: |
|
|
Field Strength: |
|
|
Signal Quality: |
|
|
AM Monitor |
Frequency |
|
Signal Quality: |
|
|
Antenna Status: |
|
|
Field Strength: |
ANC/ASC
|
Item |
Description |
|
Status |
Following items can be confirmed.
|
|
Setting |
Active noise cancellation system and active sound enhancement system function ON/OFF can be set. |
|
Connection Diagnosis |
Display a state of wiring connected with in BOSE amp. |
|
Active Test |
Active noise cancellation system function can be confirmed by test tone. |
SXM
Displays SXM monitor information.
|
Item |
Service diagnosis |
|
SXM Monitor |
SXM RADIO ID: |
|
Antenna Status: |
|
|
SXM Signal Quality: |
|
|
Module Subscription: |
|
|
Module Suspend Date: |
|
|
SXM Audio: |
|
|
Signal Quality: |
|
|
SXM Channel Art: |
|
|
SXM Traffic: |
|
|
SXM Travel Link: |
|
|
SXM Travel Link Movies Listing: |
|
|
SXM Travel Link Weather Maps: |
|
|
SXM Travel Link WS Alerts: |
|
|
SXM Travel Link Current Weather: |
|
|
SXM Travel Link Fuel Prices: |
|
|
SXM Travel Link Parking: |
|
|
SXM Travel Link Sports: |
|
|
SXM Travel Link Stocks: |