Models with Around View Monitor System

CHECK RETRACT MOTOR OPERATION SIGNAL CIRCUIT FOR OPEN

Turn ignition switch OFF.
Disconnect around view monitor control unit harness connector and door mirror (driver side) harness connector.

Check the continuity between around view monitor control unit harness connector and door mirror (driver side) harness connector.

With automatic drive positioner

Around view monitor control unit		Door mirror (driver side)		Continuity
Connector	Terminal	Connector	Terminal
B50	30	D56	8	Existed
	32		9

Without automatic drive positioner

Around view monitor control unit		Door mirror (driver side)		Continuity
Connector	Terminal	Connector	Terminal
B50	30	D3	8	Existed
	32		9

Is the inspection result normal?

YES

GO TO 2.

Repair or replace harness or connector.

CHECK RETRACT MOTOR OPERATION SIGNAL CIRCUIT FOR SHORT

Check whether or not continuity between around view monitor control unit harness connector and ground is normal.

Around view monitor control unit		Ground	Continuity
Connector	Terminal
B50	30		not exist
	32

Is the inspection result normal?

YES

Perform diagnosis of door mirror (driver side) retract motor operation signal circuit. Refer to Wiring Diagram (with automatic drive positioner) or Wiring Diagram (without automatic drive positioner).

Repair or replace connector or harness connector.