Models with Around View Monitor System

1. Turn ignition switch ON.
2. Check the signal between around view monitor control unit harness connector and ground.

   Terminals			Condition	Reference value
   (+)		(-)
   Around view monitor control unit
   Connector	Terminal
   B51	55	Ground	"CAMERA" switch is ON or shift position is "R".	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES

Replace around view monitor control unit. Refer to AROUND VIEW MONITOR CONTROL UNIT : Removal & Installation .

NO

GO TO 2.

1. Turn ignition switch OFF.
2. Disconnect around view monitor control unit harness connector and door mirror (driver side) harness connector.
3. Check the continuity between around view monitor control unit harness connector and door mirror (driver side) harness connector.
   With automatic drive positioner
   
   

   Around view monitor control unit		Door mirror (driver side)		Continuity
   Connector	Terminal	Connector	Terminal
   B51	55	D56	3	Existed

   Without automatic drive positioner
   
   

   Around view monitor control unit		Door mirror (driver side)		Continuity
   Connector	Terminal	Connector	Terminal
   B51	55	D17	3	Existed

Is the inspection result normal?

YES

GO TO 3.

NO

Repair or replace malfunctioning parts.

Check the continuity between around view monitor control unit harness connector and ground.

Is the inspection result normal?

YES

Replace side camera LH. Refer to SIDE CAMERA : Removal & Installation .

NO

Repair or replace malfunctioning parts.