LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (DTCS) (2 Of 2) >> Chassis Control Module (Chassis Control) >> DTC C1BAE-00: Accelerator Pedal System >> Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Confirmation Procedure

  1. PRECONDITIONING 

    If "Confirmation Procedure" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. CHECK DTC DETECTION 

    SYMBOL With CONSULT

    1. Start the engine.
    2. LDP function is ON.
    3. Depress the accelerator pedal for 1 second or more.
    4. Stop the engine.
    5. Turn the ignition switch OFF to ON.
      CAUTION: Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
    6. Perform self-diagnosis for "CHASSIS CONTROL".

    Is DTC "C1BAE-00" detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals