With Predictive Forward Collision Warning
- CHECK FUSES
Check if any of the following fuses are blown:
Signal name
Fuse No.
Ignition power supply
22
Is the inspection result normal?
YES
GO TO 2.
NO
Replace the blown fuse after repairing the affected circuit if a fuse is blown.
- CHECK DRIVER ASSISTANCE BUZZER CONTROL MODULE POWER SUPPLY CIRCUIT
Check voltage between driver assistance buzzer control module harness connector and ground.
Terminal
Condition
Voltage
(Approx.)
(+)
(-)
Driver assistance buzzer control module
Ground
Ignition switch
Connector
Terminal
M56
1
ON
Battery voltage
Is the inspection result normal?
YES
GO TO 3.
NO
Repair the driver assistance buzzer control module power supply circuit.
- CHECK DRIVER ASSISTANCE BUZZER CONTROL MODULE GROUND CIRCUIT
- Turn the ignition switch OFF.
- Disconnect the driver assistance buzzer control module.
- Check for continuity between driver assistance buzzer control module harness connector and ground.
Driver assistance buzzer control module
Ground
Continuity
Connector
Terminal
M56
5
Existed
13
Is the inspection result normal?
YES
INSPECTION END
NO
Repair the driver assistance buzzer control module.