Application Item

CONSULT can display each diagnostic item using the diagnostic test modes as follows.

Mode	Function description
ECU identification	Parts number of chassis control module can be read.
Self Diagnostic Results	Self-diagnostic results and freeze frame data can be read and erased quickly. ^*1
DATA MONITOR	Input/Output data in chassis control module can be read.
ACTIVE TEST	Send the drive signal from CONSULT to the actuator. The operation check can be performed.
Work Support	Components can be quickly and accurately adjusted.
Re/programming, Configuration	Read and save the vehicle specification (TYPE ID). Write the vehicle specification (TYPE ID) when replacing chassis control module.

^* 1: The following diagnosis information is erased by erasing.