With Automatic Drive Positioner

1. Select "RECLN PULSE" in "Data monitor" mode with CONSULT.
2. Check reclining sensor signal under the following conditions.

   Monitor item	Condition		Value
   RECLN PULSE	Seat reclining	Operate (forward)	Change (increase) *1
   		Operate (backward)	Change (decrease) *1
   		Release	No change *1

   ^*1 : The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES

INSPECTION END

NO

Perform diagnosis procedure. Refer to Diagnosis Procedure .