With Automatic Drive Positioner

1. Select "TELESCO PULSE" in "Data monitor" mode with CONSULT.
2. Check telescopic sensor signal under the following conditions.

   Monitor item	Condition		Value
   TELESCO PULSE	Steering telescopic	Operate (forward)	Change (increase) *1
   		Operate (backward)	Change (decrease) *1
   		Release	No change *1

   ^*1 : The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES

INSPECTION END

NO

Perform diagnosis procedure. Refer to Diagnosis Procedure .