LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (1 Of 4) >> Component/Circuit Diagnosis >> Battery Temperature Sensor >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. CHECK BATTERY TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect battery current sensor.
    3. Check the resistance between battery current sensor connector terminals.

      Battery current sensor

      Resistance

      +

      -

      Terminal

      2

      3

      continuity with the resistance value 100 Ohm or more

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace battery negative cable assembly.

scientia non olet · About LEMON Manuals