VR30DDTT engine
- CHECK THROTTLE CONTROL MOTOR (BANK 1)
- Turn ignition switch OFF.
- Disconnect electric throttle control actuator (bank 1) harness connector.
- Check the resistance between electric throttle control actuator (bank 1) terminals as per the following.
Electric throttle control actuator (bank 1)
Resistance
(Approx.)
+
-
Terminals
2
1
1 - 15 Ohm [at 25 deg. C (77 deg. F)]
Is the inspection result normal?
YES
GO TO 2.
NO
Replace electric throttle control actuator (bank 1). Refer to INTAKE MANIFOLD COLLECTOR : Exploded View .
- CHECK THROTTLE CONTROL MOTOR (BANK 2)
- Turn ignition switch OFF.
- Disconnect electric throttle control actuator (bank 2) harness connector.
- Check the resistance between electric throttle control actuator (bank 2) terminals as per the following.
Electric throttle control actuator (bank 2)
Resistance
(Approx.)
+
-
Terminals
2
1
1 - 15 Ohm [at 25 deg. C (77 deg. F)]
Is the inspection result normal?
YES
INSPECTION END
NO
Replace electric throttle control actuator (bank 2). Refer to INTAKE MANIFOLD COLLECTOR : Exploded View .