Direct Adaptive Steering System
- PERFORM SELF-DIAGNOSIS
With CONSULT
- Turn the ignition switch ON.
- Erase self-diagnosis for "EPS/DAST 3".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Turn the ignition switch ON.
- Perform self-diagnosis for "EPS/DAST 3".
Is DTC "U1010-49" detected?
YES
Replace steering force control module. Refer to STEERING FORCE CONTROL MODULE : Removal & Installation .
NO
- Check enlarged contact spring of terminal. Refer to Inspection .
- Perform intermittent incident while turning steering wheel. Refer to Inspection .