Without Direct Adaptive Steering System
- PERFORM SELF-DIAGNOSIS
With CONSULT
- Turn the ignition switch OFF to ON.
- Erase self-diagnostic results for "EPS/DAST 3".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Start the engine.CAUTION: Never drive the vehicle.
- Perform self-diagnosis for "EPS/DAST 3".
Is DTC "C1607" detected?
YES
Power steering control module is malfunctioning. Replace steering gear assembly. Refer to STEERING GEAR AND LINKAGE : Removal & Installation .
NO
Check pin terminal and connection of each harness connector for malfunctioning conditions.