LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Control Systems >> Steering Control System (DTCS) (1 Of 2) >> EPS/DAST 3 (Steering Force Control Module) >> DTC C13E1-00: Steering Clutch >> Confirmation Procedure >> Direct Adaptive Steering System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Direct Adaptive Steering System

  1. PRECONDITIONING 

    If "Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. CHECK DATA MONITOR 

    SYMBOL With CONSULT

    1. Start the engine.
      CAUTION: Never drive the vehicle.
    2. On the CONSULT screen, select "EPS/DAST 3">>"DATA MONITOR">>"TORQUE SEN MAIN 1".
    3. Check that the value is within standard value while steering the steering wheel. Refer to Values On The Diagnosis Tool .

    Is the inspection result normal?

    YES

    Steering clutch protection function is active temporarily by overloading the steering wheel. This is not system malfunction.

    NO

    Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .

scientia non olet · About LEMON Manuals