LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Control Systems >> Steering Control System (DTCS) (1 Of 2) >> EPS/DAST 3 (Steering Force Control Module) >> DTC C13F2-00: Mismatched Software Version >> DTC Diagnosis Procedure >> Direct Adaptive Steering System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Direct Adaptive Steering System

  1. CHECK THE WORK 

    Check the work performed just before.

    What is the work performed just before?

    RE/PROGRAMMING

    Perform the "RE/PROGRAMMING" according to the procedure. Refer to "CONSULT Operation Manual",

    Replacing control module

    When replacing the control module, replace three control modules as a set. Refer to STEERING FORCE CONTROL MODULE : Removal & Installation and STEERING ANGLE MAIN CONTROL MODULE : Removal & Installation and STEERING ANGLE SUB CONTROL MODULE : Removal & Installation . After replacing three control modules, perform the self-diagnosis again, and then check that DTC "C13F2-00" is not detected.

scientia non olet · About LEMON Manuals