Direct Adaptive Steering System
- PRECONDITIONING
If "Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Perform self-diagnosis for "DAST 1".
Is DTC "C13E6-00" detected?
YES
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO
The temporary rise of steering angle main control module internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END
- Start the engine.