LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Control Systems >> Steering Control System (DTCS) (2 Of 2) >> DAST 2 (Steering Angle Sub Control Module) >> DTC C13A3-00: Control Module >> Confirmation Procedure >> Direct Adaptive Steering System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Direct Adaptive Steering System

  1. PRECONDITIONING 

    If "Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    SYMBOL With CONSULT

    1. Start the engine.
      CAUTION: Never drive the vehicle.
    2. Turn the steering wheel from full left stop to full right stop.
    3. Return the steering wheel to the straight-ahead position.
    4. Perform self-diagnosis for "DAST 2".

    Is DTC "C13A3-00" detected?

    YES

    Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals