DTC Confirmation Procedure
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Perform "EPS/DAST 3" self-diagnosis.
Is DTC "C1607" detected?
YES
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Inspection .
NO
Confirmation after repair: INSPECTION END
- Start the engine.