LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Transfer Case >> Transfer Case (DTCS) >> All Mode AWD/4WD (AWD Control Unit) >> DTC U1010: Control Unit (Can) >> Confirmation procedure >> AWD models >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    SYMBOL With CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Perform self-diagnosis for "ALL MODE AWD/4WD".

    Is DTC "U1010" detected?

    YES

    Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END