Electric Power Steering System

1. Turn ignition switch OFF.
2. Remove the heated steering wheel. Refer to STEERING WHEEL : Removal & Installation .
3. Check continuity between heated steering wheel harness connector terminal and ground.

   Heated steering wheel	Condition	Continuity
   Terminal
   1 - 2	Leather surface temperature of 20 deg. C (68 deg. F) or less	Existed
   	Leather surface temperature of 30 deg. C (86 deg. F) or more	Not existed

Is the inspection result normal?

YES

GO TO 2.

NO

Replace heated steering wheel. Refer to STEERING WHEEL : Removal & Installation .

Check resistance between heated steering wheel connector terminals.

Is the inspection result normal?

YES

INSPECTION END

NO

Replace heated steering wheel. Refer to STEERING WHEEL : Removal & Installation .