Direct Adaptive Steering System
- PERFORM CONFIGURATION
Perform configuration for each control module. Refer to Work Procedure (EPS/DAST 3), or Work Procedure (DAST 1), or Work Procedure (DAST 2)
GO TO 2.
- PERFORM SELF-DIAGNOSIS
With CONSULT
- Turn the ignition switch ON.
- Erase self-diagnosis for "EPS/DAST 3".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Start engine.CAUTION: Never drive the vehicle.
- Perform self-diagnosis for "EPS/DAST 3".
Is DTC "C13EE-00" detected?
YES
Replace steering force control module. Refer to STEERING FORCE CONTROL MODULE : Removal & Installation .
NO
INSPECTION END