Diagnosis Procedure
Armed phase is not activated when door is locked using door lock and unlock switch.
- CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)
Press the LOCK button of door lock and unlock switch.
Are all doors LOCKED?
YES
GO TO 2.
NO
Check Intelligent Key system (door lock function). Refer to Diagnosis Procedure .
- CHECK HOOD SWITCH
Check hood switch.
Refer to Component Function Check .
Is the inspection result normal?
YES
GO TO 3.
NO
Repair or replace malfunctioning parts. Refer to Diagnosis Procedure .
- CHECK TRUNK ROOM LAMP SWITCH
Check trunk room lamp switch.
Refer to Component Function Check .
Is the inspection result normal?
YES
GO TO 4.
NO
Repair or replace malfunctioning parts. Refer to Diagnosis Procedure .
- REPLACE BCM
Replace BCM. Refer to BCM : Removal & Installation .
Is the inspection result normal?
YES
INSPECTION END
NO
Check intermittent incident. Refer to Inspection .