Alternator : Service Data
|
Applied model |
VR30DDTT |
||
|
Type |
A003TX2391 |
A003TL0191 |
|
|
MITSUBISHI make |
|||
|
Nominal rating |
[V - A] |
12 -170 |
12 -150 |
|
Ground polarity |
Negative |
||
|
Minimum revolution under no-load (When 13.5 V is applied) |
[rpm] |
Less than 1, 300 |
|
|
Hot output current (When 13.5 V is applied) |
[A/rpm] |
More than 138/2, 500 More than 168/5, 000 |
More than 122/2, 500 More than 144/5, 000 |
|
Regulated output voltage |
[V] |
14.1 - 14.7 * |
|
|
Minimum length of brush |
[mm (in)] |
More than 5.00 (0.1969) |
|
|
Brush spring pressure |
[N (g, oz)] |
4.1 - 5.3 (439 - 520, 15.5 - 18.4) |
|
|
Slip ring minimum outer diameter |
[mm (in)] |
More than 22.1 (0.870) |
|
|
Rotor (Field coil) resistance |
[Ohm] |
2.0 - 2.3 |
1.7 - 2.0 |
*: Adjustment range of power generation voltage variable control is 11.4 - 15.6 V.