Component Function Check

With CONSULT

1. Start engine.
2. On CONSULT screen, select "ENGINE">>"Data Monitor".
3. Check that the "FUEL PRES SEN V" indication.

   Monitor Item	Condition	Values/Status
   FUEL PRES SEN V	Engine speed: Idle	0.730 - 1.000 V
   	Engine speed: Revving engine from idle to 4, 000 rpm quickly	1.000 - 2.900 V

Without CONSULT

1. Start engine.
2. Check the voltage between ECM harness connector terminals as per the following conditions.

   ECM			Condition	Value
   Connector	+	-
   	Terminal
   F143	47	85	Engine speed: Idle	0.73 - 1.0 V
   			Engine speed: Revving engine from idle to 4, 000 rpm quickly	1.0 - 2.9 V

Is the inspection result normal?

YES

INSPECTION END

NO

Refer to Diagnosis Procedure .