Electric Power Steering System
- PROGRAMMING OF POWER STEERING CONTROL MODULE
Perform programming of power steering control module. Refer to Work Procedure .
CAUTION: Do not replace the power steering control module until self-diagnosis has been completed.GO TO 2.
- PERFORM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for "EPS/DAST 3".
NOTE: Replace the power steering control module even if other DTCs are displayed along with "C1602" in self-diagnosis for "EPS/DAST 3".Is DTC detected?
YES
Replace the power steering control module. Refer to STEERING GEAR AND LINKAGE : Removal & Installation .
NO
INSPECTION END