Direct Adaptive Steering System
- PRECONDITIONING
If "Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- CHECK DATA MONITOR
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- On the CONSULT screen, select "EPS/DAST 3">>"DATA MONITOR">>"TORQUE SEN MAIN 1".
- Check that the value is within standard value while steering the steering wheel. Refer to Values On The Diagnosis Tool .
Is the inspection result normal?
YES
Steering clutch protection function is active temporarily by overloading the steering wheel. This is not system malfunction.
NO
Refer to DTC Diagnosis Procedure .
- Start the engine.