Application Items

CONSULT performs the following functions via CAN communication using ADAS control unit 2.

Diagnosis mode	Description
Configuration	The vehicle specification that is written in ADAS control unit can be displayed or stored The vehicle specification can be written when ADAS control unit is replaced
Self Diagnostic Result	Displays the name of a malfunctioning system stored in the ADAS control unit
Data Monitor	Displays ADAS control unit input/output data in real time
Active Test	Enables an operational check of a load by transmitting a driving signal from the ADAS control unit to the load
ECU Identification	Displays ADAS control unit part number
CAN Diag Support Monitor	Displays a reception/transmission state of CAN communication and ITS communication
Work Support	Displays causes of automatic system cancellation occurred during system control