Operation Description
- Front camera unit monitors lane markers of the traveling lane. It transmits the detected lane condition signal to ADAS control unit 2 via CAN communication.
- When judging from a lane marker detection signal that the vehicle is approaching the lane marker, the ADAS control unit 2 controls the following item to alert the driver.
- Activates the steering vibration motor by ADAS control unit 2.
- ADAS control unit 2 transmits a meter display signal to combination meter via CAN communication and turns ON/OFF the LDW system display.
OPERATING CONDITION
- LDW system display (white): ON (Speaker icon ON in "Lane" position)
- Vehicle speed: approximately 60 km/h (37 MPH) or more
- Turn indicator signal: After 2 seconds or more from turned OFF
NOTE:
- LDW system ON/OFF can be set on the integral switch.
- After the operating conditions of warning are satisfied, the warning continues until the vehicle speed reaches approximately 50 km/h (32 MPH)
- LDP system is OFF.
- The LDW system may not function properly, depending on the situation. Refer to Precautions for Lane Departure Warning/Lane Departure Prevention