Detailed Flow
- GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).
GO TO 2.
- CHECK DTC WITH AUTOMATIC DRIVE POSITIONER SYSTEM
CONSULT
Select "Self Diagnostic Result" mode of "AUTO DRIVE POS.".
Refer to DTC Index .
Is any symptom described and any DTC is displayed?
Symptom is described, DTC is displayed.
GO TO 3.
Symptom is not described, DTC is displayed.
GO TO 7.
Symptom is described, DTC is not displayed.
GO TO 4.
- CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
GO TO 7.
- CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
GO TO 5.
- CHECK NORMAL OPERATING CONDITION
Check normal operating condition. Refer to Description .
Is the incident normal operation?
YES
Inspection End.
NO
GO TO 6.
- PERFORM BASIC INSPECTION
Isolate the malfunctioning point with a basic inspection.
GO TO 8.
- PERFORM DTC CONFIRMATION PROCEDURE
Perform the confirmation procedure for the detected DTC.
Is the DTC displayed?
YES
GO TO 9.
NO
Check intermittent incident. Refer to Intermittent Incident .
- PERFORM COMPONENT FUNCTION CHECK
Perform the component function check for the isolated malfunctioning point.
GO TO 9.
- DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Isolate the malfunctioning point by performing the diagnosis procedure relevant to the symptom during the component diagnosis.
GO TO 10.
- REPAIR OR REPLACE
Repair or replace the malfunctioning part.
GO TO 11.
- FINAL CHECK
Perform the DTC confirmation procedure (if DTC is detected) or component function check (if no DTC is detected) again, and then check that the malfunction can be repaired securely.
Are all malfunctions corrected?
YES
Inspection End.
Symptom is detected.
GO TO 4.
DTC is detected.
GO TO 7.