Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item	Unit	Main Signals	Selection From Menu	Contents
STARTER SW	"On/Off"	x	x	Ignition key switch ON (START, ON) /OFF (ACC, OFF) status judged from the ignition switch signal.
SET SW	"On/Off"	x	x	ON/OFF status judged from the setting switch signal.
MEMORY SW 1	"On/Off"	x	x	ON/OFF status judged from the seat memory switch 1 signal.
MEMORY SW 2	"On/Off"	x	x	ON/OFF status judged from the seat memory switch 2 signal.
SLIDE SW-FR	"On/Off"	x	x	ON/OFF status judged from the sliding switch (forward) signal.
SLIDE SW-RR	"On/Off"	x	x	ON/OFF status judged from the sliding switch (backward) signal.
RECLN SW-FR	"On/Off"	x	x	ON/OFF status judged from the reclining switch (forward) signal.
RECLN SW-RR	"On/Off"	x	x	ON/OFF status judged from the reclining switch (backward) signal.
LIFT FR SW-UP	"On/Off"	x	x	ON/OFF status judged from the lifting switch front (up) signal.
LIFT FR SW-DN	"On/Off"	x	x	ON/OFF status judged from the lifting switch front (down) signal.
LIFT RR SW-UP	"On/Off"	x	x	ON/OFF status judged from the lifting switch rear (up) signal.
LIFT RR SW-DN	"On/Off"	x	x	ON/OFF status judged from the lifting switch rear (down) signal.
TILT SW-UP	"On/Off"	x	x	ON/OFF status judged from the tilt switch (up) signal.
TILT SW-DOWN	"On/Off"	x	x	ON/OFF status judged from the tilt switch (down) signal.
TELESCO SW-FR	"On/Off"	x	x	ON/OFF status judged from the telescoping switch (forward) signal.
TELESCO SW-RR	"On/Off"	x	x	ON/OFF status judged from the telescoping switch (backward) signal.
MIR CON SW-UP	"On/Off"	x	x	ON/OFF status judged from the mirror switch (up) signal.
MIR CON SW-DN	"On/Off"	x	x	ON/OFF status judged from the mirror switch (down) signal.
MIR CON SW-RH	"On/Off"	x	x	ON/OFF status judged from the door mirror remote control switch RH signal.
MIR CON SW-LH	"On/Off"	x	x	ON/OFF status judged from the door mirror remote control switch LH signal.
MIR CHNG SW-R	"On/Off"	x	x	ON/OFF status judged from the door mirror remote control switch (switching to right) signal.
MIR CHNG SW-L	"On/Off"	x	x	ON/OFF status judged from the door mirror remote control switch (switching to left) signal.
TILT PULSE	--	-	x	Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.
TELESCO PULSE	--	-	x	Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.
MIR/SEN RH U-D	"V"	-	x	Voltage input from door mirror sensor RH up/down is displayed.
MIR/SEN RH R-L	"V"	-	x	Voltage input from door mirror sensor RH left/right is displayed.
MIR/SEN LH U-D	"V"	-	x	Voltage input from door mirror sensor LH up/down is displayed.
MIR/SEN LH R-L	"V"	-	x	Voltage input from door mirror sensor LH left/right is displayed.
SLIDE PULSE	--	-	x	Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.
RECLN PULSE	--	-	x	Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases.
LIFT FR PULSE	--	-	x	Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.
LIFT RR PULSE	--	-	x	Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases.
VEHICLE SPEED	--	x	x	Display the vehicle speed signal received from combination meter by numerical value [km/h].
P RANG SW CAN	"On/Off"	x	x	ON/OFF status judged from the P range switch signal.
R RANGE (CAN)	"On/Off"	x	x	ON/OFF status judged from the R range switch signal.
Driver door	"On/Off"	x	x	ON/OFF status judged from the door switch (front driver side) signal.
Passenger door	"On/Off"	x	x	ON/OFF status judged from the door switch (front passenger side) signal.
IGN ON SW	"On/Off"	x	x	ON/OFF status judged from the ignition switch signal.
Auto ACC status	"On/Off"	x	x	ON/OFF status judged from the ACC switch signal.
KYLS DR UNLK	"On/Off"	x	x	ON/OFF status judged from the driver side door unlock actuator output switch signal.
KEYLESS ID	--	x	x	Key ID status judged from the key ID signal.
VHCL SPEED (ABS)	"On/Off"	x	x	ON/OFF status judged from vehicle speed signal.
HANDLE	"LHD"	x	x	RHD/LHD status judged from handle position signal.
TRANSMISSION	"A/T"	x	x	CVT status judged from transmission.
INITIAL STATE	"DONE/YET"	x	x	Displays the default status of the log-in function.
USER1 REGIST	"DONE/YET"	x	x	Displays the USER1 registration or non-registration status of the log-in function.
USER2 REGIST	"DONE/YET"	x	x	Displays the USER2 registration or non-registration status of the log-in function.
USER3 REGIST	"DONE/YET"	x	x	Displays the USER3 registration or non-registration status of the log-in function.
USER4 REGIST	"DONE/YET"	x	x	Displays the USER4 registration or non-registration status of the log-in function.
LOGIN USER	"USER1/USER2/USER3/USER4"	x	x	Displays the current log-in user with the log-in function.
USER1 SW	"On/Off"	x	x	ON/OFF status judged from user1 change switch signal.
USER2 SW	"On/Off"	x	x	ON/OFF status judged from user2 change switch signal.
USER3 SW	"On/Off"	x	x	ON/OFF status judged from user3 change switch signal.
USER4 SW	"On/Off"	x	x	ON/OFF status judged from user4 change switch signal.
LOGIN USER CHANGE	"PRBT/PRMT"	x	x	Display the user change permission or inhibition status of the log-in function.
KEY LINK FUNCTION	"On/Off"	x	x	Displays the ON/OFF status of the Intelligent Key interlock function.
Log-in user setting 1	"Off/User1/User2/User3/User4"	x	x	The user number that is used for transmitting the settings of the log-in function is displayed.
Log-in user setting 2	"Off/User1/User2/User3/User4"	x	x	The user number that is used for receiving the settings of the log-in function is displayed.
Log-in user setting copy status	"On/Off"	x	x	The copy status of the Log-in function is displayed with "On/Off".