DTC Detection Logic
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P050A |
00 |
COLD START CONTROL (Cold Start Idle Control System Performance) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
|||
|
Threshold |
ECM does not control engine idle speed properly when engine is started with pre-warming up condition |
|||
|
Diagnosis delay time |
-- |
|||
|
P050B |
00 |
COLD START CONTROL (Cold start ignition timing performance) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
|||
|
Threshold |
ECM does not control ignition timing properly when engine is started with pre-warming up condition |
|||
|
Diagnosis delay time |
-- |
|||
|
P050E |
00 |
COLD START CONTROL (Cold start engine exhaust temperature too low) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
|||
|
Threshold |
The temperature of the catalyst inlet does not rise to the proper temperature when the engine is started with pre-warming up condition |
|||
|
Diagnosis delay time |
-- |
|||