Diagnosis Procedure
- CHECK VCR MOTOR
- Turn ignition switch OFF.
- Disconnect VCR control module harness connector.
- Check the continuity between VCR control module harness connectors.
VCR control module
Continuity
Terminal
1
2
Existed
14
2
14
Is the inspection result normal?
YES
Replace VCR control module. Refer to Removal and Installation
NO
GO TO 2.
- CHECK VCR MOTOR CIRCUIT
- Disconnect VCR motor harness connector.
- Check the continuity between VCR control module harness connectors and VCR motor harness connector.
VCR control module
VCR motor
Continuity
Connector
Terminal
Connector
Terminal
F90
1
F94
2
Existed
2
3
14
1
Is the inspection result normal?
YES
GO TO 3.
NO
Repair or replace error-detected parts.
- CHECK VCR MOTOR
Refer to Component Inspection .
Is the inspection result normal?
YES
Check intermittent incident. Refer to intermittent incident .
NO
Repair or replace malfunctioning parts.