DTC Detection Logic
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P2563 |
00 |
TC BOOST CONTROL POSITN SEN A (Turbocharger boost control position sensor A circuit range/performance) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
|||
|
Threshold |
ECM detects the following status when ECM operates the fully closed position learning of a wastegate control valve immediately after engine cold start: A voltage signal transmitted from the turbocharger boost control position sensor is higher than 1.50 V, or lower than 0.50 V. |
|||
|
Diagnosis delay time |
5 consecutive seconds |
|||