DTC Confirmation Procedure
- CHECK DTC PRIORITY
If DTC "C1A50" is displayed with DTC "U1000", first diagnose the DTC "U1000".
Is applicable DTC detected?
YES
Perform diagnosis of applicable DTC. Refer to DTC Description .
NO
GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Ignition switch ON.
- Perform "All DTC Reading".
- Check if "C1A50" is detected as the current malfunction in "Self Diagnostic Result" of "EPS/DAST 3".
Is "C1A50" detected as the current malfunction?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair, refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.