Component Inspection (P Position Switch)

1. Disconnect the electric shift selector connectors.
2. Check the continuity between electric shift selector connector terminals.

   Electric shift selector			Condition	Continuity
   P position switch	Terminal
   No. 1	13	24	When P position switch is pressed	Existed
   			When P position switch is released	Not existed
   No. 2	6	1	When P position switch is pressed	Not existed
   			When P position switch is released	Existed

Is the inspection result normal?

YES

INSPECTION END

NO

Replace the electric shift selector due to malfunction in the P position switch. Refer to Removal and Installation .