LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2021 >> QX50 Essential, 4WD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> Shift (Electric Shift Control Module) >> DTC P18E0-00: CVT Output Rev Speed >> DTC Confimation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confimation Procedure

CAUTION: Always drive vehicle at a safe speed.
  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON.
    2. Drive the vehicle at 30 km/h (19 MPH) or more for 60 seconds.
    3. Stop the vehicle.
    4. Check DTC.

    Is "P18E0-00 detected?

    YES

    Go to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Go to Intermittent Incident .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals