DTC Detection Logic
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P272B |
00 |
T/M range select motor (Transmission Range Select Motor Control Circuit Current Too High) |
Diagnosis condition |
When Ignition switch is ON |
|
Signal |
Motor A (U phase / V phase / W phase) signal |
|||
|
Threshold |
Either of two energized phases is in the non-energized state.
NOTE:
Energized: Approx. 0 V, Non-energized: 9 - 16 V
|
|||
|
Diagnosis delay time |
-- |
|||