Physical Values
|
Terminal No. (Wire color) |
Description |
Condition |
Value (Approx.) |
|||
|
+ |
- |
Signal name |
Input/Output |
|||
|
1 (SB) |
Ground |
AWD solenoid power supply |
Output |
Engine speed: At idle |
0 V |
|
|
Engine speed: 3, 000 RPM or more constant |
2.5 V* |
|||||
|
2 (Y) |
Ground |
AWD solenoid ground |
Input |
Always |
0 V |
|
|
7 (W) |
Ground |
Push-button ignition switch |
Input |
Push-button ignition switch: ON |
Battery voltage |
|
|
Push-button ignition switch: OFF |
0 V |
|||||
|
8 (GR) |
-- |
CAN high |
Input/Output |
-- |
-- |
|
|
9 (G) |
Ground |
Power supply (AWD solenoid) |
Input |
Always |
Battery voltage |
|
|
10 (B) |
Ground |
Ground |
-- |
Always |
0 V |
|
|
11 (B) |
Ground |
Ground |
-- |
Always |
0 V |
|
|
15 (LG) |
Ground |
Power supply (AWD control unit) |
Input |
Always |
Battery voltage |
|
|
16 (G) |
-- |
CAN low |
Input/Output |
-- |
-- |
|
*: The values are changed by throttle opening and engine speed.
CAUTION:
When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.