Cancel Operation

When any of following conditions exist, cruise operation will be canceled.
- ASCD switch is pressed (Set speed will be cleared)
- CANCEL switch is pressed
- More than 2 switches at ASCD steering switch are pressed at the same time (Set speed will be cleared)
- Brake pedal is depressed
- Selector lever is in N, P or R range
- Vehicle speed decreased to 13 km/h (8 MPH) lower than the set speed
- VDC system is operated
- Actual vehicle speed decreased to approximately 30 km/h (18 MPH) or less
When the ECM detects any of the following conditions, the ECM will cancel the cruise operation and inform the driver by blinking ASCD indicator.
- Engine coolant temperature is excessively higher than the normal operating temperature, ASCD indicator may blink slowly.
  (When the engine coolant temperature decreases to the normal operating temperature, ASCD indicator will stop blinking and the cruise operation will be able to work by pressing SET - switch or RES + switch.)
- Malfunction for some self-diagnoses regarding ASCD control
  (When ASCD is operating, all of ASCD operations will be canceled and vehicle speed memory will be erased.)