Component Function Check
- CHECK INTAKE AIR TEMPERATURE (IAT) SENSOR 2
- Turn ignition switch OFF.
- Disconnect turbocharger boost sensor harness connector.
- Check resistance between turbocharger boost sensor terminals as follows.
Turbocharger boost sensor
Condition
Resistance (k Ohm)
+
-
Terminal
4
3
Temperature [ deg. C (deg. F)]
25 (77)
1.80 - 2.20
Is the inspection result normal?
YES
Check intermittent incident. Refer to Intermittent Incident .
NO
Proceed to Diagnosis Procedure .