Component Inspection (Intake Air Temperature Sensor 2)

1. Turn ignition switch OFF.
2. Disconnect turbocharger boost sensor harness connector.
3. Check resistance between turbocharger boost sensor terminals as follows.

   Turbocharger boost sensor		Condition		Resistance (k Ohm)
   +	-
   Terminal
   4	3	Temperature [ deg. C (deg. F)]	25 (77)	1.80 - 2.20

Is the inspection result normal?

YES

INSPECTION END

NO

Replace mass air flow sensor (with intake air temperature sensor). Refer to Exploded View .