Diagnosis Procedure
- PERFORM SELF-DIAGNOSIS
CONSULT
- Ignition switch ON.
- Erase "Self Diagnostic Result" mode of "EPS/DAST 3".
- Ignition switch OFF and wait for at least 10 seconds.
- Start the engine.CAUTION: Never drive the vehicle.
- Turn the steering wheel to the center position.CAUTION: Never touch the steering wheel after setting it to center position.
- Select "Self Diagnostic Result" mode of "EPS/DAST 3".
Is DTC "C13E3-00" detected?
YES
Replace steering force control module. Refer to Removal and Installation .
NO
Spiral cable protection function is active by steering the steering wheel over the limit angle. This is not system malfunction.