DTC Diagnosis Procedure

With CONSULT

Perform self-diagnosis for "ALL MODE AWD/4WD".

Is DTC detected?

YES

Check the DTC. Refer to DTC Index .

NO

GO TO 2.

With CONSULT

1. Erase self-diagnosis result for "ABS".
2. Turn the ignition switch OFF, and wait 10 seconds or more.
3. Start the engine and drive the vehicle for a short period of time.
   NOTE: Vehicle must be driven after repair or replacement to erase the previous DTCs.
4. Stop the vehicle.
5. Perform self-diagnosis for "ABS".

Is DTC "C1118" detected?

YES

Replace the ABS actuator and electric unit (control unit). Refer to ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) : Removal & Installation .

NO

Check terminals and connection of each harness connector for abnormal conditions. Repair / replace harness, connector, or terminal.