Symptom Table (One Intelligent Key Has The Symptom, Other Keys Operate Normally)
|
Door lock operation (remote keyless entry) |
Door lock operation (request switch of front/rear/back door) or trunk/back door open operation (opener switch of trunk/back door panel) |
Engine started with push-button ignition switch operation (Intelligent Key is within the detection area of inside key antenna) |
Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch) |
|
OK |
OK |
No crank, No start |
No crank, No start |
- CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Symptom Table .
GO TO 2.
- REGISTER INTELLIGENT KEY
- Register the Intelligent Key.
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO 3.
- REPLACE INTELLIGENT KEY
- Replace the Intelligent Key and perform registration again.
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO 4.
- REPLACE BCM
- Replace BCM. Refer to BCM : Removal & Installation .
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
Check intermittent incident. Refer to Inspection .