Diagnosis Procedure
NOTE:
- Before performing the diagnosis following procedure, check "Work Flow". Refer to Work Flow .
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
CONDITIONS OF VEHICLE (OPERATION CONDITIONS)
- Ignition switch is in OFF or LOCK position.
- Intelligent Key is removed from key slot.
- CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent Key button?
YES
GO TO 2.
NO
Refer to Diagnosis Procedure .
- CHECK VEHICLE SECURITY ALARM OPERATION
Check vehicle security alarm operation.
Does alarm (headlamps and horns) active?
YES
GO TO 3.
NO
Refer to System Description .
- CHECK "PANIC ALARM SET" SETTING IN "WORK SUPPORT"
Check "PANIC ALARM SET" setting in "WORK SUPPORT".
Refer to Diagnosis Description .
Is the inspection result normal?
YES
GO TO 4.
NO
Set "PANIC ALARM SET" setting in "WORK SUPPORT".
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
Check intermittent incident. Refer to Inspection .
NO
GO TO 1.