Diagnosis Procedure
Armed phase is not activated when door is locked using door request switch.
NOTE:
Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITION)
Confirm the setting of "SECURITY ALARM SET" is ON in "WORK SUPPORT" mode of "THEFT ALM" of "BCM" using CONSULT.
- CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)
Lock/unlock door with door request switch.
Refer to System Description .
Is the inspection result normal?
YES
GO TO 2.
NO
Check Intelligent Key system (door lock function). Refer to Diagnosis Procedure .
- CHECK HOOD SWITCH
Check hood switch.
Refer to Component Function Check .
Is the inspection result normal?
YES
GO TO 3.
NO
Repair or replace hood switch.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
Check intermittent incident. Refer to Inspection .
NO
GO TO 1.