Possible Cause
NOTE:
Confirm if DTC is PAST or CRNT. If DTC is CRNT, proceed with Diagnosis Procedure. If DTC is PAST, clear DTC. Do not replace the ABS actuator and electric unit (control unit) for a PAST DTC.
|
PAST DTC
|
CRNT DTC
|
- Harness or connector
- ABS actuator and electric unit (control unit) power supply system
- Fuse
- Fusible link
- 12V battery
- CAN communication line
- Incomplete neutral position adjustment of steering angle sensor
- Improper installation of steering angle sensor
|
- Harness or connector
- Steering angle sensor
- ABS actuator and electric unit (control unit)
- Fuse block (J/B)
- CAN communication line
- Wheel alignment
- Incomplete neutral position adjustment of steering angle sensor
- ABS actuator and electric unit (control unit) power supply system
- Fuse
- Fusible link
- 12V battery
|