Work Procedure

Are camera lens and windshield contaminated with foreign materials?

YES

Replace lane camera unit (Refer to LANE CAMERA UNIT : Removal & Installation .) and GO TO 2.

YES

Clean windshield.

NO

GO TO 2.

Check lane camera unit installation condition (installation position, properly tightened, a bent bracket).

Is it properly installed?

YES

GO TO 3.

NO

Install lane camera unit properly, and perform camera aiming.

Check vehicle height. Refer to WHEEL ALIGNMENT : Service Data .

Is vehicle height appropriate?

YES

INSPECTION END

NO

Repair vehicle to appropriate height.