Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
|
Component |
Signal description |
|
Yaw rate/side/decel G sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line *1 .
|
|
Transfer control unit *2 |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
|
|
Combination meter |
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
|
*1: Communication line between yaw rate/side/decal G sensor and ABS actuator and electric unit (control unit)
*2: Models with 4WD system