Confirmation Procedure

If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

Which DTC is detected?

P0102

GO TO 2.

P0103

GO TO 3.

1. Start engine and wait at least 5 seconds.
2. Check DTC.

Is DTC detected?

YES

Refer to DTC Diagnosis Procedure .

NO

INSPECTION END

1. Turn ignition switch ON and wait at least 5 seconds.
2. Check DTC.

Is DTC detected?

YES

Refer to DTC Diagnosis Procedure .

NO

GO TO 4.

1. Start engine and wait at least 5 seconds.
2. Check DTC.

Is DTC detected?

YES

Refer to DTC Diagnosis Procedure .

NO

INSPECTION END